Exterior wall EPS moldings custom European architecture

2022-09-07

EPS decorative line is a new type of exterior wall decorative line and components, it can completely replace the traditional cement (GRC) components, more suitable for installation on the exterior EPS, XPS insulation wall, reflecting the European style, classical, elegant decorative style, to ensure that the main building exterior wall will not appear cold, thermal bridge effect, especially for the European style of high-rise buildings, the installation of cement components is very difficult, and long construction period The installation is very difficult, the duration is long, there will be cracks over time, poor durability, so the use of EPS decorative elements easy to install, economic, long durability.
EPS decorative line components are made of demoulded B2 grade fireproof polystyrene as the main body, paste alkali-resistant glass fiber mesh cloth, with a special bonding outer protection layer composite.
1. Not subject to temperature change, cold resistance, heat resistance, not affected by humid climate and acid rain.
2. This product has passed the  test, can fireproof and does not emit toxic substances, is an environmentally friendly product.

Product features.
1. Construction low cost: can be sawed, nailed, glued, saving 60% cost than wood cement products.
2. Light weight: light weight and good hardness, with elasticity and good toughness.
3. Integrity: overall planning and design, simple and elegant.
4. Waterproof: no moisture absorption, impervious to water, both mold resistance.
5. Corrosion resistance: acid and alkali resistance, no insects, no termites.
6. Fire resistance: The product is tested by the National Fire Prevention Center to meet the B2 level to achieve the characteristics of non-spontaneous combustion and non-combustion.
7. Environmental protection: non-toxic raw materials, washable, contact with people, etc.

"Chengdu Ouwei Decoration Engineering Co., Ltd. is located in Xinglong Industrial Park, Zhongjiang County, Deyang City, Sichuan Province. Its predecessor is Ouwei Decorative Materials Factory, which was established in 2009. After 6 years of training, it was formally established as the company in December 2015. Production base covers an area of more than 50 acres, more than 300 employees. Is set research and development, design, production GRC GRG, EPS, flue, imitation wood parts and other diversified companies. With design, construction drawing, mold opening, production, installation, after-sales service as one of the one-stop service system and a team with modern design technology and management experience.
Since the establishment of our company in line with the ""quality first, integrity development"" concept of development, closely follow the requirements of national construction architectural decoration materials, adhering to the integrity of European architectural decoration art, learned European architectural decoration classical culture, combined with Chinese traditional craft, constantly forge ahead. We sincerely hope that people of insight will come to comminicate business, we will adhere to the quality of survival, customer first business policy, for the development of new environmental protection building materials to contribute to the cause!"

 

Tao Qiang

365781909@qq.com

Online Store

Disclaimer: This article is reproduced from other media. The purpose of reprinting is to convey more information. It does not mean that this website agrees with its views and is responsible for its authenticity, and does not bear any legal responsibility. All resources on this site are collected on the Internet. The purpose of sharing is for everyone's learning and reference only. If there is copyright or intellectual property infringement, please leave us a message.